Wunschzettel

BioniX P120 A-RGB

Pressure-optimised 120 mm Fan with A-RGB

Choose variant

Variante

A-RGB for Full Colour Control

The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or via an external controller and synchronized with other hardware lighting. 

Easy installation and extension via Connector Technology

The ARCTIC BioniX P120 A-RGB have a modular cable management and use two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling *. The included connector block also enables a wireless series connection.
 * all necessary cables are included 

High-quality plain bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency.
In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended.

Optimised for static pressure

With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance.
This makes the BioniX P120 A-RGB particularly suitable for use on covered case vents or inlets with filters.
 

Maximum smoothness, minimum vibration

The operating noise of the newly developed ARCTIC motor is barely noticeable even at the lowest speed.
Thanks to sinus magnetization, the P fan's motor generates only 5% of the commutation vibrations of a conventional DC motor. In addition, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling.

400 to 2300 rpm regulated via PWM

With a wide speed range and the connector functionality, the fan speed of the BioniX P120 A-RGB can be controlled synchronously with other fans. This reduces the noise development to a minimum while at the same time guaranteeing maximum cooling performance. 

Available as a bundle or individually

The BioniX P120 A-RGB is availlable as Singe Case Fan or in a Bundle, including 3 BioniX P120 A-RGB and ARCTICs A-RGB Controller.
Youtube-Icon

PRODUCT VIDEO


 

Technical specifications & manual

Performance
Fan Speed:
400 - 2300 rpm
Airflow:
48 CFM/ 81.55 m³/h
Static Pressure:
2.1 mm H₂O
Noise Level:
0.45 Sone
Operating Ambient Temperature:
0 - 40 °C
Fan
Fan Frame:
BioniX
Control Type:
PWM PST
Connector:
7-Pin-Connector
Fan Bearing:
Fluid Dynamic Bearing
Electric Characteristics:
Typical Voltage:
12 V DC
Starting Voltage:
5 V
Current/ Voltage:
0.13 A/ 12 V
Cable Lenght:
400 mm
Size & Weight
Lenght:
120 mm
Width:
120 mm
Height:
30mm
Weight:
209g
  • Width: 125 mm
  • Height: 34 mm
  • Length: 161 mm
  • Weight: 0.259 kg

Product gallery

US$24.99

Prices incl. VAT plus shipping costs

Our
Support

Do you need help or product advice?

Our competent customer service is at your side with questions about our products, spare parts and in case of complaints. Support